Multiaqua MHWX-09-C-1, Installation And Operation Manual

Page: 9 / 28

352
INSTALLATION & OPERATING
MANUAL
MHWX Hi-Wall Fan Coils
9,000 – 36,000 BTUH
Figure 3
INSTRUCTIONS FOR
INSTALLING THE MOUNTING
PLATE
1. After a suitable place for installation
has been selected, place the mounting
plate horizontally on the wall. Make sure
the alignment is horizontal. Use a plumb
line if available. Mark on the wall where
the mounting holes will be drilled.
Figure 3
2. Drill the holes for the type of
mounting hardware to be used. Check
local building codes for correct mounting
hardware. Secure the mounting plate and
check for stiffness.
3 Drill a diagonal piping access hole (2
.75”) in diameter on both sides of the
mounting bracket. Refer to figure 2 for
field supplied hole locations
Figure 4
4. Check local and national codes for
piping access wall penetrations. See
figure 5 if wall sleeves are required.
Figure 5
Figure 4
Figure 5
-------- CAUTION -------
Care must be taken when
handling sheet metal. Sheet
metal parts have sharp edges
and could cause injury.