These specifications are subject to change without notice.
Check www.multiaqua.com for latest published information.
Fan coil unit - MHCFC4W Series
Section 4) SELECTION OF INSTALLATION LOCATION
1. Do not install the unit in rooms where any hazards are present which include, but are not limited
to, flammable gas, alkaline or acid substances, or where hazardous or corrosive atmosphere exists.
Aluminum/copper coils and/or internal plastic components can be damaged beyond repair. Cabi-
nets are internally insulated from the factory. However, when these units are installed in high ambi-
ent/high humidity environments, additional external cabinet insulation may be required.
THESE UNITS ARE NOT RATED FOR EXPLOSION PROOF ENVIRONMENTS
2. Do not install in workshops or kitchens where airborne oil vapors or other chemicals may be
deposited on the coils, reducing the performance or damaging the internal plastic parts of the unit.
3. Choose a position as close to the center of the room as possible.
4. The installation location must have sufficient strength to carry the gross
weight of the unit listed in the table to the right.
5. Verify that the return grille and supply
louvers are not obstructed and the con-
ditioned air is able to circulate through-
out the room.
6. Check the distance between the upper
slab and finished ceiling to ensure the
unit has adequate space for installation.
See Figure 1.
7. Ensure there is sufficient space around the unit
to service it. The dimensions shown in Figure 2
are suggestions. Your application may require
more space to access controls, control valves,
pumps, etc.
MHCFC4W-04
50.6 lbs.
MHCFC4W-08
71.5 lbs.
MHCFC4W-12
88 lbs.
MHCFC4W-16 125.4 lbs.
Figure 2
