NETWORK MANAGEMENT
mDot
TM
AT Command Reference Guide
39
Select downlink frequencies for US915/AU915 using UPLINK-CHANNEL % 8. For example, an uplink using
channel 34 would be responded to in Rx1 on 500 kHz Channel 2.
Join Delay settings are independently configurable with the AT+JD command (refer to
). LoRaWAN
Join windows open at the default 5/6 seconds after end of transmission for OTA
Set AT+FSB=1-8 to enable hybrid functionality (refer to
).
LoRaWAN Private
Syncword 0x12 is used.
Select downlink frequencies for US915/AU915 using UPLINK-CHANNEL % 8. For example, an uplink using
channel 34 would be responded to in Rx1 on 500 kHz Channel 2.
Join Delay settings are independently configurable with the AT+JD command (refer to
). LoRaWAN
Join windows open at the default 5/6 seconds after end of transmission for OTA
Set AT+FSB=1-8 to enable hybrid functionality (refer to
).
Syntax
Command
AT+PN=<parameter1>
help AT+PN
AT+PN?
AT+PN=?
Parameters and Values
Parameter1
0
Private MTS network mode
1
Public LoRaWAN network mode. (Default)
2
Private LoRaWAN network mode.
Command with Response Examples
AT+PN=0
OK
help AT+PN
AT+PN: Set public network mode (0: PRIVATE_MTS, 1: PUBLIC_LORAWAN, 2:
PRIVATE_LORAWAN)
OK
AT+PN=?
