VERSA-LINK ATX-250
Your Versa-Link ATX-250 can be used
in a wide variety of applications by
changing the selectable features .
The following features are set with the
configuration switches located on the
back of your ATX-250:
Use a pen or other small instrument to
make changes to the configuration
switches .
IMPORTANT:
Configuration switch
changes are not activated until AC pow-
er is re-applied . Therefore, unplug and
reconnect the AC power cord after mak-
ing any configuration switch changes to
enter these settings into memory .
6. DEVICE CODE
6.
SELECTION
Your ATX-250 analyzes incoming calls
for touch-tones and analyzes your
equipment for both pulse-dial and touch-
tone device selection codes .
There are four different sets of device
selection codes that your ATX-250 will
recognize . Set the configuration switches
1 and 2 according to the following table:
Remember to unplug and re-connect the
AC power after changing the
configuration switches .
The third set is useful for compatibility
with other Versa-Link products . The
fourth set allows extra security for
equipment attached to “
DEVICE 2
” .
If your equipment is pulse-dial only, you
cannot use the codes containing the *
symbol .
USER SELECTABLE
FEATURES
6
