MISG-IO-M
3
2
4
5
1
i
i
!
i
4 Start-Up, Operation (Continued)
Strain Gauge Amplifier IO-Link
Page-6
Danger
Danger of electric shock!
Conduct electrical mounting only in dead-voltage condition!
Property damage by electrostatic discharge!
Comply with safety measures as per DIN EN 61340-5-1/-3, to prevent an electrostatic charge build-
up!
Only qualified personnel is allowed to work on the electronics.
4.6 Supply Voltage
Connections
Notes for the electrical
connection:
The listed information can
occasionally deviate from the
actual device values. If this is the
case, please comply with the
product label! The product label
always lists the current information
for the specific device.t.
The output signal must be proportional to the sensor signal. If this is not the case, it can be a sign of a
wrong mounting position or a bad adjustment. Please read under chapter 5
Fault Recovery
(p.7) for
further information.
4.8 Function Test and Fault Detection
4.7 Electrical Connection
To Sensor
To Evaluation
M12x1
4-pole
U+
= 1
U-
= 3
C/Q
= 4
M12x1 (Socket)
5-pole
Cable
4-pole
U+
= 1
U- (GND)
= 3
S+
= 2
S-
= 4
Not used
= 5
U+
= bn
U- (GND)
= bu
S+
= wh
S-
= bk
