Mounting
1.
Estimate the position of holding clips or glue ares
2.
Assembly the sticks with the connectors and check the
position of the holding clips or place the glue pads on the
sticks
3.
Push the sticks into the holding clips or
glue the sticks on the desired place
5.
Put the end cap on the last stick
6.
Connect the first stick with the line adapter
7.
Connect the line adapter to the power socket
8.
Remove the contact protection in the battery compartment
9.
Start the LED strip by using the remote control
10.
Advice:
Receiver for the infrared-signals of the remote is the
repeater. The remote control need a direct and barrier-free
connection to the repeater. Max. distance 5-7 m.
Battery replacement
Please open the battery compartment on the side of the remote
control by pushing the clamping pin by simultaneously
extracting the compartment.
Please always use an identical battery of type CR2025
·
3 V.
Please consider correct poling by placing the battery in the
compartment. The side of the positive pole is marked by (+)
on the compartment.
english
13
MANUAL RGB STICKS