tint-LED-PANEL
62
INSTRUCTION MANUAL
Operation
The tint LED panel is already connected to the supplied remote control and
can be controlled directly. Further tint lamps and lights must first be
integrated in the remote control (see chapter „Operation - Adding a new tint
product“).
The tint remote control is a radio remote control.
• You do not need to “aim” at the tint products with the tint remote control to
operate them.
• The tint remote control will also penetrate solid materials such as walls,
doors and windows.
• The maximum range (depending on the obstacles between the tint remote
control and the bulbs) is approx. 30 metres in the open air.
• Each button press will be confirmed by the feedback display lighting up.
Basic functions
Switching on/off
Press the standby button to switch the other tint product on and off again. The
memory function will store the last “illumination state” and will start again
automatically the next time the tint product is switched on.
Set colors
Press one of the four pressure points (fig. 4) to select the
desired color:
Short press:
The color will switch in the desired
direction on the color scale.
Long press:
The color will jump to a permanently
stored color value.
fig. 4
