Muji MJBTS-1, User Manual

Page: 6 / 132

6
Wireless equipment precautions
Compliance of radio transmitter
and interference
USA model
This device complies with Part.15 of FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause interference
2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Labeling of authorization
FCC ID: XEG-MJBTS1
EEA (European Economic Area) model
This equipment complies with the harmonised stan-
dards of DIRECTIVE 1999/5/EC ( R&TTE )
Labeling of conformity
CE marking:
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
CAUTION
Authorization of wireless devices are different in
countries or regions. Please use only in the country
where you purchased the product.
o
Depending on the country, restrictions on the
use of Bluetooth wireless technology might exist.
Confirm the laws and regulations of the country or
region where you want to use the unit before use.
Radiation Exposure requirements
This equipment meets the regulation, which is recog-
nized internationally, for the case of human exposure
to radio waves generated by the transmitter.
Based on the following two conditions:
o
End-users and installers must be provided with
antenna installation instructions and transmitter
operating conditions for satisfying RF exposure
compliance.
o
This equipment should be installed and operated
with minimum distance 20 cm between the radiator
and your body.
Statement of compliance
USA model
This equipment complies with FCC radiation expo-
sure limits set forth for an uncontrolled environment
and meets the FCC radio frequency Exposure
Guidelines.
EEA (European Economic Area) model
This equipment complies with EN.62311; Assessment
of electronic and electrical equipment related to
human exposure restrictions for electromagnetic fields;
the harmonised standard of DIRECTIVE 1999/5/EC.