Muji AD-SD1-SG, User Manual

Page: 16 / 48

-15-
Cleaning Up Spills
If a spill happens due to tipping over or tilting the diffuser unit while there is water in the water
tank, water may enter the internal components of the diffuser, resulting in a malfunction.
If a spill happens, immediately perform the following procedures to drain the water inside.
* Be sure to unplug the AC adapter from
the electrical outlet and turn off the
diffuser before performing any
procedures.
* Never plug in/unplug the AC adapter
with wet hands.
・
After removing the AC
adapter cord from the
cable guide, remove the
AC adapter plug from the
DC jack.
・
Gently turn the outer cover anticlockwise (as seen from the
top) , and then remove the cover.
* When removing/replacing the outer cover, always set the
diffuser on a stable horizontal surface. Do not tilt the diffuser
unit at an angle.
* Water droplets will adhere to the inside of the outer cover.
Accordingly, remove the cover in a location not susceptible to
water damage. Set down a towel or similar to catch water droplets.
Do not allow water to enter the air outlet.
1. Unplug the AC adapter from the
electrical outlet
2. Remove the AC adapter plug from
the DC jack
3. Remove the outer cover