MuginUAV
www.MuginUAV.com
Image enhancement
Auto adjust image brightness and contrast ratio
Color palette
Black, white, pseudo color
Auto Non-uniform correction
Yes (no shutter)
Digital zoom
2x, 4x
Sync correct time
Yes
Temperature type
Temperature bar (
pseudo
color display) max
temp, min temp, FOV center temp
Temperature warning
-20
℃
~120
℃
Thermal
Object
Tracking
Update rate of deviation
pixel
25Hz
Output delay of deviation
pixel
<3ms
Minimum object size
16*16 pixel
Maximum object size
128*128 pixel
Tracking speed
±32 pixel/frame
Object memory time
100 frames (4s)
GPS Information Display and Serial Port Control Wiring Diagram
To use the serial port function, please use the jumper cap to connect RX1 and RX2, TX1 and TX2.
External serial port TX connect with TX3. External serial port RX connect with RX3. External serial
port GND connect with GND of wiring box.
Note: The signals in the black square are all TTL serial ports. Do not connect 5V and GND to serial
data Interface!
The output of date radio stations (TTL 3.3 V) directly controls the gimbal and camera movements,
in which the gimbal actions include:
1, Yaw control and angle output, pitch control and angle output, speed setting, angle setting, stop,
return to Home;
2, camera actions include: zooming, focusing, start record, stop record, taking photos, record /
photo Switch, zoom times information output, etc;
3, when there is no respond on the command from the control box, you need to enter the 4,
serial port baud rate 115200, 8-bit data bit, 1 stop bit, no check bit, HEX.
For specific protocols, please contact us for technical support.
