7
IF USING 12V DC POWER SOURCE
1.
Remove the rubber port cap at the bottom
of the camera (Fig. 1).
Connect an external
power supply using a 12V DC connection
(Fig. 2).
2.
Run the cord
up
the side of the camera
where
a hook
is
provided behind the
hinge
of the camera door. This will support
the
power cord and take pressure off of the
connection point (Fig. 3).
3.
When not in use, replace the rubber port
cap at the bottom of the camera to protect
the 12V DC universal plug-in port.
BATTERIES
CONT . . .
NOTE: Make sure the camera is powered off prior to installing batteries
or power supply
Fig. 2
Fig. 3
Fig. 1
