Page 11
OPERATION MODE:
The operation mode setting
is accessible immediately after the Time setting.
The screen will be blank with either
Video
or
Photo
displayed on the right side of screen. Press
Enter
to change between
Photo
and
Video mode.
OPTIONS: Photo | Video
DATE:
This setting is used by the camera to
display the correct date on the Info Bar of the
image.
PHOTO BURST:
This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 3 photos
Note: This setting is only applicable in photo
mode.
PIR DELAY:
This setting is used to determine how
long the camera will wait before reinitializing the
PIR sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec |
60 sec
RESOLUTION:
This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: 4 MP | 6 MP | 16 MP
Note: This setting is only applicable in photo
mode.
VIDEO LENGTH:
This setting is used to determine
the length of time, in seconds, of a video recording
OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec
Note: This setting is only applicable in video
mode.
TIME:
This setting is used by the camera to display
the correct time on the Info Bar of the image.
Camera Configuration cont.
