Hinging Cubby Box Locker
Secure the MUD Cubby-Box Locker to the base plate between the seats using the 4 x M6 x 30mm
fixings and washers.
Secure the cubby-box to the lid of the MUD Cubby-Box Locker. Use the M6 x 30mm Torx Fixings
for the front fixings. Use the M6 x 45mm Torx fixings for the rear fixings. Reuse the original
washers from the cubby-box fixings for these fasteners.
Position the divider plates to suit your requirements and fix in place using the plastic fixing rivets.
Fit your pre-cut rubber matting into the locker.
Sliding Cubby-Box Locker
Attach the drawer slides to the base.
Notice that there are two different drawer slides included with the locker. Only one of the drawer
slides has the drawer slide locking/release mechanism.
The drawer slide will lock in place at full extension. Pushing the locking tab inwards releases the
locking slide.
Fasten the drawer slides to the locker base using the upper most fixing holes on the side of the
locker base.
You can attach the locking drawer slide to whichever side of the locker you deem the most
convenient. On right-hand drive cars we recommend the using right-hand side of the locker. On
left-hand drive cars we recommend the left-hand side of the locker. Secure the drawer slides to
the base using the two M5 nyloc nuts.
Ensure that when mounted on the box that both of the drawer slides extend backwards!
11
12
9
10
