J-WRANGLER-07 Installation Guide
Jeep Wrangler 4 Door JK Series (Drivers Side) 2007 - UP
(Loaded/Amplified)
STEP 1:
STEP 2:
Locate the rooftop mounting bolts as shown (driver side,
behind the rear seat above the wheel well).
Note:
Enclosure
does not fit convertible version.
Attach the mounting bracket to the enclosure as shown
using the supplied hardware.
STEP 3:
STEP 5:
When the bracket is assembled to the enclosure, this is
how the bracket mounts to the vehicle.
This is for reference only!
Your installation is complete. Enjoy your new bass in a small
space.
STEP 4:
Make all final wire connections (See Page 2), and mount
the enclosure into place using the bolts removed from the
rooftop mounting location in Step 1.
