background image

M T X . C O M

15

WARRANTY PERIOD

At MTX Audio we engineer products that will stand up to the test of time. We also realize that from 

time to time a problem may occur. That’s why our products carry a 2-year limited warranty that begins 

at the time of sale to the end user.

Of course, we’re here to help. If you experience an issue with any of our products within the warranty 

period, please contact our customer service technical line at 1-800-CALL-MTX to help troubleshoot 

your issue. If, after speaking with our technical experts it is determined that a problem lies with the 

product, the technician will provide you with a Return Authorization number and all relevant details 

you’ll need to get the product taken care of.

MITEK WARRANTY

MiTek Mobile products (including, but not limited to: MTX, Coustic, Streetwires, Xtant, BassSlammer, 

and Thunder Marine) purchased in the USA from an AUTHORIZED MITEK DEALER are guaranteed 

against defects in material and workmanship for the period of time specified. The warranty period 

begins the day the product is purchased by the end user, and this warranty is limited to the original 

retail purchaser of product. Products found to be defective during the warranty period will be 

repaired or replaced with equivalent product by MiTek at no charge. This warranty is void if it is 

determined that unauthorized parties have attempted repairs or alterations of any nature, and the 

warranty does not extend to cosmetics or finish. MiTek disclaims any liability for other incurred or 

consequential damages resulting from product defects. MiTek’s total liability will not exceed the 

purchase price of the product.

Summary of Contents for PROXP-20-SW

















Reviews: