MTX MUD6SPBT Thunder Sports, Owner'S Manual

Page: 3 / 8

M T X . C O M
3
ELECTRICAL OPERATION
1. Tap the Power button to turn the unit on. (Power, Ground, and ACC wire need to be connected to a
12V power source.)
2. Tap the Power button to switch modes between Bluetooth and AUX.
3. Hold the Power button for 2 seconds to turn the unit Off.
Note:
The buttons will stay illuminated
as long as the ACC wire has 12V applied to it.
4. The included fuse loop, ring terminals, and butt connector allow for easy wire connection to a 12V
power source.
Note:
The indicator light will illuminate Blue when in Bluetooth mode and Green when in AUX mode.
OPERATION
Follow these steps to utilize the Bluetooth functionality using a Bluetooth enabled device:
1. Power the unit On by tapping the Power button once.
2. Select Bluetooth by tapping the Power button until it blinks Blue.
3. Select “MTX Sound Bar” from the menu on your Bluetooth enabled device. The unit will power
on in Bluetooth mode first when it is turned on by tapping. If the accessory wire is disconnected,
(vehicle is turned off and then turned on) the unit will revert back to the previous Bluetooth or
AUX setting.
4. Choose “Pair” when prompted.
5. Once “Paired” the unit will be able to play audio from your Bluetooth device.
The front panel control buttons will control track forward/back and volume up/down in this mode. The
Play/Pause button will mute the output and the LED indicator will blink Blue when in Mute mode.
Follow these steps to utilize Bluetooth in a NFC (Near Field Communication) enabled device:
1. Power the unit On by tapping the Power button once.
2. Select Bluetooth by tapping the Power button until it blinks Blue.
3. Tap the NFC enabled device on the left side of the enclosure (marked by NFC label).
4. Choose “Pair” when prompted.
5. Once “Paired” the unit will be able to play audio from your NFC device.
Follow these steps to utilize an Auxiliary input device:
1. Power the unit On by tapping the Power button once.
2. Select Auxiliary by tapping the Power button until it blinks Green.
3. Connect an audio device to the AUX input using the “Green” 3.5mm input on the side of the unit.
The LED will illuminate Green, and will blink Green when in mute mode.
The front panel control buttons will adjust the Volume up/down in this mode. The Play/Pause button
will mute the audio output and the LED indicator will blink Green when in Mute mode.
Using the auxiliary output (black connector).
1. Auxiliary out is a variable output that allows connection to a secondary audio device, whether it is
an external amplifier connected to speakers or subwoofer.
2. The MUD6SPBT can be used with a second MUD6SPBT unit. For the best audio performance, the
second unit connected via Auxiliary should have the volume set to the max.
Controlling the Volume
The LED indicator light will blink in both Bluetooth and AUX modes at max volume.