MTX 952027, User Manual

Page: 17 / 108

17
GASOLINE CHAIN SAW
EN
MAINTENANCE
ATTENTION!
All maintenance work may only be carried out with the power off.
Conducting timely maintenance will extend the life of the tool and increase work efficiency. Maintenance of the
device, except for the operations mentioned here, must be performed by qualified personnel at authorized service
centers. Each time after completing work, check the device for component integrity and connection reliability.
Contact an authorized service center if necessary.
Preventative maintenance
Service Activity Scheme
After each
use
After running hours
Element Activities 10 20
Screws / Nuts / Bolts Check / tension V
Air filter Cleaning or replacing V
Spark plug Cleaning / regulation / replacement V
Fuel hoses Check / replace if necessary V
Chain brake components Check / replace if necessary V
Air filter
Do not operate the saw without an air filter. Dust can get into the engine, which will damage it. Keep the air
filter clean!
Air filter cleaning:
1. Remove the air filter cover, remove the air filter (A) (Pic. 24).
2. Clean the air filter. Wash it with clean, warm, soapy water. Rinse with clean cold water and dry completely.
3. Install the air filter. Install the engine / air filter cover. Make sure the cover is set correctly. Tighten the screw
to secure the cover.
А
Рiс. 24
Fuel filter
ATTENTION!
Do not use a saw without a fuel filter. The fuel filter must be replaced every 20 hours of
operation.
The fuel filter replacement procedure is performed exclusively at service centers.