LASER LEVEL WITH A DEVICE FOR DRILLING AND DUST BOX
4
ENG
9. Push the level to the wall, turn on the microcompressor and be sure that the level held independently.
drawing 3
10. Drill the hole (drawing 4).
drawing 4
11. Remove the drill bit from the dust collector.
12. Push the release button and remove the device from the wall.
13. Remove the dust collector by simultaneously pressing the fixtures on both sides.
14. Clean the container and put it back.
BATTERY REPLACEMENT
Laser Battery replacement
Open the cover underneath, replace the three batteries with the polarity (+/-) (drawing 5).
Microcompressor Battery replacement
Open the cover by turning counter-clockwise (against the clock)(drawing 6).
Summary of Contents for 350409
Page 10: ......
