MTU Detroit Diesel 12 V 2000 P62, Technical Publication

Page: 133 / 208

Task Description 129
6.13.2 Engine oil – Level check
Preconditions
• Engine is stopped and starting disabled.
Oil level check prior to engine start
1. Withdraw dipstick from guide tube and wipe it.
2. Insert dipstick into guide tube up to the stop,
withdraw after approx. 10 seconds and check
oil level.
3. Oil level must be between "min." and "max." marks.
4. Top up to "max." if required (
→ Page 127).
5. Insert dipstick into guide tube up to the stop.
Oil level check after the engine is stopped
1. 5 minutes after stopping the engine, remove oil dipstick from the guide tube and wipe it.
2. Insert dipstick into guide tube up to the stop, withdraw after approx. 10 seconds and check oil level.
3. Oil level must be between "min." and "max." marks.
4. Top up to "max." if required (
→ Page 127).
5. Insert dipstick into guide tube up to the stop.
MS15009/00E 06-09 © MTU