manualshive.com logo in svg

MTU 8V4000L63, Operating Instructions Manual

Share
Download
MTU 8V4000L63 Operating Instructions Manual Download Page 59

112317 – HI T-Exhaust B7

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112318 – HI T-Exhaust B8

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112319 – HI T-Exhaust B9

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112320 – HI T-Exhaust B10

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112401 – LO T-Exhaust A1

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too low as compared
with the average value.

1. Check spark plug.
2. Check emission values.
3. Check ignition timing (→ Page 149).
4. Check valve drive.

112402 – LO T-Exhaust A2

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too low as compared
with the average value.

1. Check spark plug.
2. Check emission values.
3. Check ignition timing (→ Page 149).
4. Check valve drive.

MS150057/02E 2013-10

| Troubleshooting | 59

TIM-ID: 0000017543 - 001

Summary of Contents for 8V4000L63






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands