manualshive.com logo in svg

MTU 12V2000Gx5, Operating Instructions Manual

Share
Download
MTU 12V2000Gx5 Operating Instructions Manual Download Page 59

6 Maintenance

6.1 Maintenance task reference table [QL1]

The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The Mainte-
nance Schedule is a stand-alone publication.

The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.

Task

Option Maintenance tasks

W0500

Check engine oil level.

(→ Page 54)

W0501

Visually inspect engine for leaks and general condition.

(→ Page 54)

W0502

X

Check intercooler drain(s).

(→ Page 128)

W0503

Check service indicator of air filter.

(→ Page 131)

W0505

Check relief bores of coolant pump(s).

(→ Page 141)

W0506

Check engine for abnormal running noises, exhaust color and
vibrations.

(→ Page 54)

W0507

X

Drain water and contaminants from fuel prefilter.

(→ Page 121)

W0508

X

Check reading on differential pressure gage of fuel prefilter.

(→ Page 120)

W0534

Carry out test run, minimum duration: until steady-state tem-
perature is reached, no less than 1/3 load (monthly).

(→ Page 89)

W1001

Replace fuel filter or fuel filter element.

(→ Page 119)

W1002

Check valve clearance.

(→ Page 97)

W1003

Check belt condition and tension, replace belt if necessary.

(→ Page 147)

W1005

Replace air filter.

(→ Page 129)

W1006

Replace fuel injectors.

(→ Page 105)

W1007

Replace fuel injection pump(s).

(→ Page 101)

W1008

Replace engine oil filter when changing engine oil, or when
the interval (years) is reached, at the latest.

(→ Page 135)

W1010

Coolant cooler: Check exterior of cooler elements for dirt.

-

W1011

Perform endoscopic examination.

(→ Page 90)

W1056

Replace fuel pressure maintaining valve.

(→ Page 116)

W1178

Replace pressure pipe neck in cylinder head.

(→ Page 111)

Table 2: Maintenance task reference table [QL1]

MS15019/04E 2016-02

| Maintenance | 59

TIM-ID: 0000034855 - 003

Summary of Contents for 12V2000Gx5











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands