User's Manual
MS3727
Slim Plug-In Signal Selector
Rev. 1.50
4
10. Switching Configurations
Power Supply: OFF
Power Supply: ON; Switching Input: OFF
Power Supply: ON; Switching Input: ON
Power Supply: ON; Switching Input: Transition (ON to OFF or OFF
to ON) *Transition time is included in response time.
11. Maintenance and Inspection
Check the unit for proper characteristics and settings about once
every two years.
12. Warranty Period and Scope
[Warranty Period]
MTT’s hardware products are warranted for a period of seven (7)
years from the date of shipment.
[Warranty Scope]
1) MTT warrants that its hardware products are free from defects
in materials and workmanship and conform to its product
specifications.
2) MTT ships the products under its appropriate quality
management system and quality control, but does not warrant,
expressed or implied, that the operation, output, or indication
of the hardware will be uninterrupted or error free. MTT shall
not be liable and make no warranty for any damage to or any
safety or performance trouble in the customer’s or any other
third party’s equipment if the operation, output, or indication is
interrupted or faulty.
3) If, during the warranty period, the product proves to be
defective when used in accordance with the relevant user’s
manual, the product will be repaired or replaced.
4) This warranty does not apply to any malfunction or failure
resulting from the following:
a. Improper or incomplete maintenance or calibration,
b. Any other cause, which does not relate with the delivered
product,
c. Modification or repair by any person other than MTT, and
d. Natural disasters or other unavoidable accidents, for which
MTT is not liable.
DC Current Input
DC Current Input
DC Current Input
DC Current Input
DC Voltage Input /DC Current Input (shunt resistor 50
Ω
)
DC Voltage Input /DC Current Input (shunt resistor 50
Ω
)
DC Voltage Input /DC Current Input (shunt resistor 50
Ω
)
DC Voltage Input /DC Current Input (shunt resistor 50
Ω
)