MTS Systems Exceed 22 Series, Product Information

Page: 52 / 68

MTS Exceed™ 22 Series Product Information 52
Checks and Preparations Before Use
Operation
Checks and Preparations Before Use
Check
1. Check whether there are other objects within the pendulum's range of swing.
2. Check whether the energy of the used pendulum is up to specimen
requirements.
3. Check whether power and signal cables of meters are well connected. Check
whether the pendulum blade and bearing are intact, the briquetting block is
well pressed, and the span block is well aligned.
4. Check whether all gas connections are normal.
5. Press the power switch at the bottom of the electric control box to power on
the system. The touch screen should display normally after 15 seconds. If
not, check whether the system is faulty.
Preparing
Accessories
Clamp-style specimen centering device, specimen alignment block, span
alignment block and other accessories should be placed adjacent to the tester, to
facilitate their access and use. Also, pay attention to well keep small parts and
avoid them being lost.