laser exit of the hand tool directly at the treatment site.
Electrical and mechanical safety
Please turn off the equipment and disconnect the power when
performing maintenance.
It is best not to move frequently.
This equipment is connected to the ground through the ground wire in
the power cord. This grounding device is very necessary in safe
operation.
High voltage will be generated inside the device. Even if the power is off, there is
still electricity on some parts. Therefore, please cover all housings. Except the
manufacturer and its authorized maintenance personnel, no one should
disassemble the casing, otherwise it may cause electric shock.
Equipment buttons
The key of this device can be turned on, and it can only be removed
when the key switch is turned off.
No matter the machine is in any state, only press the red emergency
stop switch, the machine will immediately shut down.
The interlock switch must be connected to the machine, otherwise the
system cannot work normally.
Treatment safety
To ensure the safety of patients, well-trained personnel prioritize a comprehensive
