13
Temposonics
®
TH CANbus ATEX / IECEx / CEC / NEC / KCs / EAC Ex certified / Japanese approval
Operation Manual
Fig. 6: Temposonics
®
TH exploded view drawing
NOTICE
Connect cable to sensor
See page 21 ff. for more details.
Change orientation of cable bushing (C01, M01, N01, NF1)
Loosen the five hexagonal screws M4 (A/F 3) and remove the upper
lid (Fig. 6). Then loosen the six hexagonal screws M4 (A/F 3) of the
connection adapter (Fig. 6). Change the orientation of the connector
on six different positions at 60° each. Note the example on page
21 ff..
Part
Fastening torque
1
Screw M4×10
1.2 Nm
2
Screw M4×40
1.2 Nm
3
Earthing connection: M5×8 for mounting
2.5 Nm
Version D & G
3
Connection adapter
2
1
O-ring
Upper lid
Version E & N
3
Connection adapter
2
1
Upper lid
O-ring
