MTS Sensors
M-Series Model MH Temposonics
®
Position Sensor for Mobile Hydraulics, CAN Safety (SIL 2)
Product Data Sheet, Document Part No.: 551194, Revision B 02/12, 05/12, 08/12
2
Product specifications
Parameters
Specifications
INPUT/OUTPUT
Measured
variable:
Linear position and velocity
Output:
Direct CAN Safety acc. CiA DS-304
Resolution:
Consistent:
> 1 mm/s
CAN Safety ≤ ± 0.1 mm
Signal output frequency:
CAN Safety adjustable 1 ms to 65535 ms or
Sync. mode
Velocity:
Typical 1 m/s
Stroke length:
50 mm to 2500 mm (2 in. to 98 in.)
Measured in 5 mm (0.20 in.) increments
Linearity
uncorrected:
50 to 250 mm ≤± 0.1 mm
255 to 2000 mm < ± 0.04% full stroke
(minimum ± 0.100 mm 0.003 in.)
< ± 0.08% full stroke (for short damping zone)
500 mm ≤± 0.2 mm
750 mm ≤± 0.3 mm
1250 mm ≤± 0.5 mm
2005 to 2500 mm ≤± 0.8 mm
Hysteresis:
± 0.1 mm (0.003 in.)
Cycle time:
1 ms
Setpoint
tolerance:
± 0.2 mm (0.007 in.)
Operating
voltage:
12/24 Vdc (8-32 Vdc)
Voltage supply ripple: <1 % p-p
Power drain:
< 1.5 W
ELECTRONICS
Electrical
isolation:
500 Vdc (DC ground to machine ground)
Polarity
protection:
Up to -36 Vdc
Overvoltage
protection:
Up to 36 Vdc
M-Series Model MH CAN Safety Sensor
Product Overview and Specification
Parameters
Specifications
ENVIRONMENTAL
Operating
conditions:
Operating:
any orientation, -40 °C (-40 °F) to
+105 °C (221 °F)
Storage:
-30 °C (-22 °F) to +105 °C (221 °F)
90% relative humidity, no condensation
EMC test:
200 V/m
ISO 11452-5
ISO 14982: Agriculture and forest machinery
Shock rating:
100 g (single hit)/IEC standard 68-2-27
(survivability)
25 g / 10 to 2000 Hz /IEC standard 68-2-6
Vibration
rating:
Sensor rod, 10 mm (0.39 in.):
25 g
Sensor rod, 7 mm (0.27 in.):
15 g
WIRING
Connection
type:
One 5-wire with the M12x1 connector
and flange (provides IP69K environmental
protection when installed in a cylinder).
ROD STYLE SENSOR (Model MH)
Material:
Sensor rod:
Stainless steel 1.4306 / AISI
304L
Housing:
Stainless steel 1.4305 / AISI 303
Mechanical assembly:
Flange housing 48 mm
(1.89 in.) dia., O-ring 40.87 x 3.53 mm NBR
80, backup ring 42.6 x 48 x 1.4 PTFE
Sealing:
IP67 (IP69k when installed inside a cylinder
with M12 x 1 in. connection type)
Pressure
rating:
Sensor rod, 10 mm (0.39 in.):
Operating, 350 bar (5076 psi)
Peak, 450 bar (6615 psi)
Sensor rod, 7 mm (0.27 in.):
Operating, 300 bar (4350 psi)
Peak, 400 bar (5800 psi)
Pressure pulse test acc.:
DIN EN ISO 19879
Magnet type:
Ring magnet (see standard magnet selections)
