2
MTI P/N 063-00259 rev A ©2019 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
MTI PLUNGER LOCKS
™
PRODUCT MANUAL
1
1
2
2
3
DELETING KEYS (Non-Connect Mode Only)
KEY REGISTRATION (Complete ALL programming before installing)
Key Starter Set –
185-00459
x5
x2
x1
Connect Card -
401-00008
User Key Bulk (x5) Pack -
185-00460
x1
Swipe Authorization card again to
close enrollment mode. Enrollment
mode times out after 3 minutes of no
activity. Lock will emit 4 fast beeps
when enrollment has timed out.
Swipe each User card to lock. A
double beep tone indicates a card is
now enrolled. Repeat for each user
card, up to 250 user cards. If a card
fails to be recognized, the lock will
emit 4 fast beeps.
Swipe Authorization Card again to lock, within 10
seconds to clear all keys returning lock to a factory reset
state. Lock will emit a double beep, confirming the key
whitelist is cleared. It will stop ticking after 10 seconds
and resume normal operation if the Authorization Card is
not swiped again.
Swipe Authorization card to enter
enrollment mode. You will hear
a double beep tone, indicating
enrollment mode has been entered.
Hold Authorization Card to lock for 5 seconds, and lock
will start a ticking sound. This enters delete mode.
KEY SETS (SOLD SEPARATELY)
