background image

SAFETY DEFINITIONS

The words DANGER, WARNING, CAUTION and

NOTICE are used throughout this manual to highlight

important information. Be certain that the meanings of

these alerts are known to all who work on or near the

equipment.

This safety alert symbol appears

with most safety statements. It

means attention, become alert, your

safety is involved! Please read and

abide by the message that follows

the safety alerts symbol.

DANGER

Indicates a hazardous situation which, if not

avoided, 

will

 result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not

avoided, 

could

 result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not

avoided, 

could

 result in minor or moderate injury.

NOTICE

Indicates a situation which can cause damage 

to the generator, personal property and/or the 

environment, or cause the equipment to operate 

improperly.

NOTE: 

Indicates a procedure, practice or condition

that should be followed in order for the

generator to function in the manner

intended.

SAFETY

SAFETY SYMBOL DEFINITIONS

Summary of Contents for DUCAR DLG4000iSE























Reviews: