http://www.mtixtl.com/index.asp?PageAction=VIEWCATS&Category=919
to put the cell inside and then use
clamp to test:
Positive
Upper Side
Negative
Pole
Pole
Lower Side
2. When get everything ready, please power on the machine, go to folder “MTI-TC” and find the folder “TC5.3”
to execute the file named “BtsControl.exe”, a GUI would pop up:
1
2
3
5
4 6
1. Menu area: Set case number, language and interface style;
2. Port area: Indicate the COM port which is for testing;
3. Unit area: Show the status of the eight channels accordingly
4. Prompt area: Indicate if the COM port connects to the device
5. Check the current testing or history testing
6. Normal view/ Detail View/ Log View
If the software can not find the unit within 1 minute, check cable connection, power failure and driver
installation, if problem still, click the COM port in port area and then button “set” on the menu are and set the
unit number to 90, and then, click “search” to find out the device:
