AutoFry
OFS Operator’s Manual
8
OFS OM REV 02/19
63-0108
Hose Connections:
Hose 1
–
Connected to the bottom of the AutoFry and connects to the pump discharge fitting.
This hose will remain attached to the AutoFry when removing the OFS.
Hose 2
–
Connects the filter foot stem to the pump inlet fitting.
Disconnect this hose from the stem when changing the carbon pad filter.
Discharge Wand Assembly
–
Connects to the pump discharge fitting when disposing of old oil.
Can also be used to manually pump oil into the AutoFry through the front door. This allows you
to pump oil throughout the AutoFry vat to flush out built up sediment in the AutoFry vat.
Should be stored in a safe place when not in use.
Figure 7
Hose 1
Hose 2
Figure 8
