MTI Industries SAFE-T-ALERT 62-541-RV User Manual Download Page 5

End of Life Signal – The Sensor has a 5 Year Service Life  

All 62 Series models include an End of Life (EOL) Signal indicating   
the sensor has reached the end of its service life and you must 
replace the alarm. The signal is the LED flashing RED RED 
GREEN GREEN with a beep every 25-30 seconds. The EOL Signal 
may be reset by pushing TEST / RESET button on the alarm. This 
will reset the EOL Signal for a period of 72 hours (3 days) for a total 
of up to 30 days. After 30 days the signal cannot be reset and the 
alarm must be replaced. DO NOT DISCONNECT THE ALARM 
UNTIL YOU HAVE A REPLACEMENT ALARM AVAILABLE 
TO INSTALL.

 

 

      

 

SPECIFICATIONS 

MODEL 

62-541 & 62-542 

POWER SUPPLY 

12 VDC                                   

 

NOMINAL CURRENT DRAW                       37 mA   

 

                                                                           

 

OPERATIONAL TEMPERATURE 

-40

F to +150

o

 F     -40

o

 C to +66

o

 C 

 

RELATIVE HUMIDITY 

15% (+/- 5%)  to 95% (+/- 4%)

 

AUDIBLE OUTPUT 

85 dB @ 10 feet 

 

 

 

CO ALARM TRIGGER  

<15 Minutes @ 400 ppm            

 

 

 

 

CASE MATERIAL  

ABS 

CASE DIMENSIONS 

62-541 3.5

”W x 2.5”H x 1.25”D  

                                                                      Mounting Bracket .25"D 

 

62-542 

4.5”W x 3.25”H x 1.25”D 

 
  

  

WARRANTY 

1 Year Limited  

 

TESTING LABORATORY 

ETL 

– Intertek 

STANDARDS 

UL 2034 Third Edition,                                                  

 

  

 

 

 

                                                                      

 

OWNERS REPLACEMENT RECORD 

 

Replace  this 

SAFE-T-ALERT

TM

  62  SERIES  CO 

alarm  5  years  after 

date of installation. For new RV’s enter the month and year the RV 
was manufactured. If you are not sure, enter the month and year you 
purchased  the  RV  or  enter  May  and  the  model  year  of  the  RV 
(example May 2015), whichever is the earlier date.  
 

Installation Date: ____________________________ 

(Example: March 2015) 

 
Replace by Date   _______________ ________________ 

(5 years after Installation date – example: March 2020) 

 

  If you don’t know the installation date, replace the alarm 

no later than 5 years after the production date on the back 
of the alarm. 

 
Two self-adhesive labels are included with this Alarm. Add the 
phone numbers of your emergency service provider and qualified 
technician in the space provided. Record your replace by date on 
this label. Place one label near the alarm and one label near a fresh 
air source where you plan to gather if the alarm sounds.  
 

LIMITED PRODUCTS WARRANTY 

MTI INDUSTRIES, INC

. warrants to the original retail purchaser that its 

products will be free from defects of material or workmanship for a period 
of  One  (1)  year  from  the  date  of  retail  purchase.  If  proven  to  have  been 
defective in original materials or workmanship and returned, delivery costs 
prepaid, MTI INDUSTRIES, INC. will replace this product free of charge. 

 

LIMITS OF WARRANTY

 

Replacement  is  your  exclusive  remedy  under  this  limited  warranty  or  any 
other  warranty  (including  any  implied  warranty  of  merchantability  for  a 
particular  purpose).    Any  and  all  implied  warranties  or  merchantability  or 
fitness for a particular purpose shall be limited to the warranty period from 
the  original  date  of  retail  purchase.    MTI  INDUSTRIES,  INC.,  its  dealers 
and distributors shall in no case be responsible or in any way liable for any 
incidental  or  consequential  damages  for  any  reason.  Some  states  do  not 
allow the limitation or exclusion of incidental or consequential damages, or 
allow limitations on how long an implied warranty lasts, so the above 

limitations may not apply to  you.  This  warranty  gives  you specific rights, 
and you may also have other rights, which may vary, from state to state.  

 

PRODUCT NOT WARRANTED 

NOTE-

 

There are no user serviceable parts inside the case. Opening any 

SAFE-T-ALERT

TM

    product  for  any  reason  voids  the  warranty.

  This 

warranty does not cover damage or failure resulting from acts of God, abuse, 
misuse, neglect, or faulty installation

.  

 

WARRANTY RETURN PROCEDURES

  

 

It is MTI’s experience that a CO Alarm is sounding for a reason. Call, ask 
your dealer to call, or e-mail our Customer Service Department (as listed 
below) to trouble shoot the situation. 
  

Customer Service Phone No. -  800-383-0269    
Fax  No. 847-546-9007 
E-mail [email protected]  
Web Site: www.mtiindustries.com  

 

If Customer Service determines that the unit is defective, a Return 
Authorization (RA) number will be issued.  

No product will be accepted 

for service or replacement without first obtaining a RA number. 

 

If authorized, return this product to: 
 

MTI Industries, Inc.  
Warranty Dept. RA # (

INSERT RA NUMBER HERE

31632 N. Ellis Drive Unit 301  
Volo, IL 60073   

NOTE:  Mark the RA number in the area shown on the outside 
of the box! 

 

 

© MTI INDUSTRIES, Inc. 2018

 

 

Summary of Contents for SAFE-T-ALERT 62-541-RV






Reviews: