4. Insert the moon shaped locking plate into the moon shaped locking as shown in
Figures 4 & 5.
5. Re-insert the front chassis pivot screw as shown in Fig 6.
6. Re-install the boiler on the chassis. Make sure that no wires are pinched or cut in
the process.
7. Re-install the screws that attach the boiler shell to the chassis.
8. Re-install the removable hatch covers.
To remove the articulation locking plate, use the above procedure as a guide to
remove the boiler and the front truck pivot screw.
- Remove the articulation locking plate and replace the front truck pivot screw.
- If the Articulation Locking Plate is not used, keep in a safe place for future use.
Figure 4
Figure 5
Figure 6
