background image

Headlight Replacement Instructions

Replacement bulbs are available directly from the M.T.H. Parts Department. 
(Order online:  www.mth-railking.com, e-mail: [email protected],              
Fax:  410-423-0009, Phone: 410-381-2500, Mail: 7020 Columbia Gateway Drive, 
Columbia MD 21046-1532, ). 

The locomotive headlight is controlled by the track voltage.
The brightness will vary with a change in the track voltage.

Should the headlight bulb need to be replaced, access to the bulb is gained by 
removing the headlight bezel. Remove the headlight bezel by pulling outward while 
wiggling the bezel back and forth. Then unscrew the headlight bulb from the 
socket.

Install the new bulb by following the above instructions in reverse order.
Gently unscrew the bulbs from the socket on the mounting bracket and replace the 
bulb.

Firebox Glow Light Bulb

The firebox glow light bulb is accessed from the 
under side of  the engine, behind the motor. 
Should you need to replace the red bulb, 
unscrew the bulb by turning counterclockwise.
Reverse the procedure for installing a new bulb.

Tinplate 4696 Steam Locomotive

4

Headlight

Firebox bulb

Summary of Contents for Tinplate 4696









Reviews: