2. Learn Mode
In Learn Mode, the engine may be programmed with either an "Out & Back" route
or a "Loop" route. An "Out & Back" route begins at the 1st station (as
programmed by the operator), stops at intermediate stations, ends at the last
station, then reverses its route until it reaches the 1st station. A "Loop" route
begins at the 1st station (as programmed by the operator), stops at intermediate
stations, ends at the last station, and then begins the route over again at the 1st
station.
Example Of An Out and Back:
Example Of A Loop:
To program stations:
1. Running in Forward, stop the unit at the desired location for the first stop by
pressing the direction button. Note: if you stop the engine with the throttle
control, you must re-apply power so that the engine goes into neutral and does not
shut down.
2. Enter Learn Mode by pressing Horn - Bell - Bell - Bell - Bell. The train will then
announce that you have entered Learn Mode.
3. Press and hold the Bell button to scroll through the available stations until you
hear the one that you would like to be your first stop. Release the button quickly as
soon as you have heard the desired stop name.
Flatbush
Avenue
Flatbush
Avenue
241st
Street
42nd
Street
241st
Street
42nd
Street
Wall
Street
Flatbush
Avenue
42nd
Street
241st
Street
Wall
Street
Premier R11/34 Subway Car
8
