Premier R11/34 Subway Car
12
Lock into a Direction:
You can lock your engine into a direction (forward, neutral, or reverse) so that it
will not change directions. To do this, put the engine into the direction you want
(or into neutral to lock it into neutral), run it at a very slow crawl (as slowly as it
will move without halting), and quickly but firmly tap the Horn/Whistle button
once followed by three quick taps of the Bell button, allowing approximately ½
second to lapse between each quick button press. Two horn/whistle blasts will
indicate that the engine has made the change. The engine will not change direction
(including going into neutral) until you repeat the 1 horn/whistle, 3 bells code to
return the engine to its normal condition, even if the engine is kept without power
for extended periods of time.
whistle
Place
Engine into
Desired
Direction
Whistle
Bell
Bell
Bell
=
Direction Lock
Two Whistle Blasts
(indicates change is made)
Repeat to Return
to Normal Condition
Reset to Factory Defaults:
To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in Neutral tap the Horn/Whistle button quickly once,
followed by five quick taps of the Bell button, allowing approximately ½ second to
lapse between each quick button press. Two horn/whistle blasts will indicate that
the engine has made the change.
Automatic Sounds:
Certain Proto-Sound®2.0 sound effects automatically play in programmed
conventional mode conditions:
!
Squealing Brakes
play any time the engine's speed decreases rapidly.
!
Cab Chatter
plays at random intervals when the engine idles in neutral.
!
Engine Start-up and Shut-down
sounds play when the engine is initially
powered on or is powered off for five seconds or more.
Reset
Two Whistle Blasts
(indicates change is made)
Repeat to Return
to Normal Condition
Place
Engine in
Neutral
=
Bell
Bell
Bell
Bell
Bell
Horn/
Whistle
**Note: Automatic Sounds can be overridden in DCS Mode.
