After removing the engine from storage, add another 25 drops of fluid, letting the
wick soak up the fluid for 15 minutes prior to operation.
If you experience poor or no smoke output when the smoke unit is on and has
fluid, check the wick to see if it has become hard, blackened, and unabsorbent
around the heating element. After removing the locomotive body from its chassis,
remove the smoke unit inspection cover (see below). After removing the
inspection cover screws, lift the inspection plate away and inspect the wick. If it is
darkly discolored and hard, it should be replaced.
Replacement parts and wick replacement instructions are available directly from
the M.T.H. Parts Department (Order online: www.mth-railking.com, e-mail:
[email protected],Fax: 410-423-0009, Phone: 410-381-2500, Mail: 7020
Columbia Gateway Drive, Columbia MD 21046-1532, ).
Premier
Diesel Engine with PS-2 and Proto-Scale 3-2
19
3GS-21B GenSet
ProtoSmoke™ Fluid
ProtoSmoke™ is the recommended fluid for M.T.H.
products and can be used in other manufacturers
products as well. Choose from 12 different scents:
Christmas, Coal, Diesel, Wood Burning, Coffee, Eggs
& Bacon, Vanilla, Candy Cane, Barbeque, Pipe
Smoke, Cinnamon Roll, and Apple Pie
Smoke Unit Inspection Cover Screws
Inspecting the Smoke Unit Wick
