background image

RAILKING PCC STREET CAR

OPERATING INSTRUCTIONS

  Thank you for purchasing the RailKing PCC Street Car.  The car’s durable 
ABS body and die-cast trucks are built to ¼ inch scale proportions yet can
provide hours of operation on any O-27 Gauge track.  The car should
operate for years with any compatible AC transformer (see the chart on
page 28 for a list of compatible transformers) and is completely compatible
with most 3-rail locomotives, rolling stock and accessories.  

  The street car is equipped with a DCRU® electronic reverse unit and can
be optionally equipped with the ProtoSound® Digital Sound and train
control system which contains several deluxe features that are simple and
fun to operate.  Each feature is described among the following pages which
should be read before the car is operated.  For those of you who can’t wait
to get started, the 

Quick Start Basic Operating Instructions

 

found on Pages 

3 and 4 should be read so that you understand the basics of the operating
system.  Please note that some features are only found in the ProtoSound®
models and are marked as such.  Features not marked as ProtoSound®
features are available in all models.

Summary of Contents for PCC Street Car

































Reviews: