background image

22

MTH F3 Diesel Engine

on and off until ProtoSounds sounds two bell dings (signifying that the PFA 
features have been turned off).  Simply turn the transformer throttle OFF
and then ON again to lock
in the new setting.  To reset
ProtoSounds® to its
original factory setting of
Squeaking Brakes and PFA
on, repeat the above
procedure but keep pressing 
the whistle button in
Feature 28 until
ProtoSounds® only dings
once instead of twice.

ACTIVATING REMOTE LOCK-OUT CONTROL

  ProtoSound® equipped engines feature a RESET setting that allows the
operator to remotely “lock” the engine into forward, neutral or reverse.
This is especially useful on layouts that feature “blocked” track sections.
The lockout feature comes from the factory in the OFF position, meaning it
is not active when you first take the engine out of the box.  This is done to
prevent novice operators from accidentally locking their engine into
forward, neutral or reverse and then mistakenly thinking that the engine’s
electronics have failed.  To activate the Remote Lockout Control setting, go 
to RESET Feature 40 (See
the section entitled 

Using

RESET To Program
ProtoSounds®

 on page 17). 

Once in Feature 40, press
the transformer whistle
button and wait for
ProtoSounds to sound a bell 
ding.  Continue pressing the 
whistle button until
ProtoSounds sounds two
bell dings signifying that the Remote Lockout Control has been selected.
To lock in the setting, simply turn the throttle all the way off and then back
on again.    To turn the Remote Lockout Control setting back off, go back to 
Feature 40 and press the whistle button until only one bell ding sounds.  To
lock in the setting, simply turn the transformer throttle off and then back on
again.  Alternatively, you can go to RESET Feature 18 to reset all

In RESET Mode

Move The Throttle 

Up & Down From

High Voltage To Low

28 Times

Listen For 5 Clank 

And 3 Clink Sounds

Push The Whistle Button

Until You Hear 

2 Bell Dings

Interrupt The Throttle

To “Lock-In” 

The PFA Setting

H

In RESET Mode

Move The Throttle 

Up & Down From

High Voltage To Low

40 Times

Listen For 8 Clank 

And 0 Clink Sounds

Push The Whistle Button

Until You Hear 

2 Bell Dings

Interrupt The Throttle

To “Lock-In” 

The Lock-Out Setting

H

Summary of Contents for MTH F-3 DIESEL ENGINE









































Reviews:

Related manuals for MTH F-3 DIESEL ENGINE