MTHTrains MTH F-3 DIESEL ENGINE Page 1 Operating Instructions Manual Download | Manualshive

Page: 1 / 40

background image

R

E L E C T R I C T R A I N S

MTH F-3 DIESEL ENGINE

OPERATING INSTRUCTIONS

Thank you for purchasing the MTH Electric Trains F-3 diesel locomotive.
This ¼” scale reproduction of the famous F-3 A-B-A locomotive consist
measures over 39” in length and weighs over 11 pounds. Despite its scale
size, the locomotive is capable of operating on O-31 3-rail track with any
compatible AC transformer (see the chart on page 33 for a complete list of
compatible transformers and wiring instructions) and is completely
compatible with most other 3-rail locomotives, rolling stock and
accessories.

The locomotive is equipped with several deluxe features that are simple
and fun to operate. Each feature is described among the following pages
which should be read before the engine is operated. For those of you who
can’t wait to get started, the

Quick Start Basic Operating Instructions

found on Pages 3 and 4 should be read so that you understand the basics of
the operating system. Please note that some features are only found in the
ProtoSound® models and are marked as such. Features not marked as
ProtoSound features are available in all models.

1
2
3
...
»

Summary of Contents for MTH F-3 DIESEL ENGINE









































Reviews:

No comments

Related manuals for MTH F-3 DIESEL ENGINE

Brand: Kettler Pages: 180

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands