M.T.H. HO F-3 Diesel Engine
3
QUICK START GUIDE
I USE A REGULAR DC SUPPLY…
Step 1: Unpack your Engine (refer to unpacking instruction on pg 4)…
Step 2: Set the engine on the track …
Step 3: Apply increasing
DC
voltage until she starts up and pulls out!
CAUTION:
M.T.H. HO engines
DO NOT OPERATE ON AC
VOLTAGE
. Applying AC power to your locomotive could cause permanent
damage and will void your warranty.
Of course, you should read your manual over before running your engine,
but if you just can’t wait you’re in luck. Your MTH DCC Ready engine is
ready to run out of the box. Follow the three simple steps below to get
your new engine up and running. Now, after a few minutes, shut her down
and read through your engineer’s guide.
.
