background image

Service & Warranty Information

How to Get Service Under the Terms of  the Limited One-Year Warranty

When you suspect an item is defective, please check the operator's manual for standard operation and 
trouble-shooting techniques that may correct the problem.  Additional information may be found on 
the M.T.H. Website.  Should you still require service, follow the instructions below to obtain warranty 
service.

First, e-mail, write, call or fax a M.T.H. Authorized Service Center (ASC) in your area to obtain Repair 
Authorization.  You can find the list of  ASCs on the M.T.H. Website, www.mth-railking.com.  
Authorized Service Centers are required to make warranty repairs on items sold 

only

 from that store; 

all other repairs may-- or may not be done at the store's own discretion.  If  you did not purchase the 
item directly from the ASC, you will need to select a National Authorized Service Center (NASC).  
These centers are compensated by M.T.H. to perform warranty service for any customer whose repair 
qualifies for warranty service.  A list of  NASC retailers can be located on the M.T.H. Website or by 
calling 410-381-2580.  Should the warranty no longer apply, you may choose either an ASC or NASC 
retailer to service your M.T.H. Product.  A reasonable service fee will be charged.

CAUTION:  Make sure the product is packed in its original factory packaging including its foam and 
plastic wrapping material to prevent damage to the merchandise.  There is no need to return the entire 
set if  only one of  the components is in need of  repair 

unless otherwise instructed by the Service Center

.  

The 

shipment must be prepaid and we recommend that it be insured. A cover letter including your 
name, address, daytime phone number, e-mail address (if  available), Return Authorization 
number (if  required by the service center, a copy of  your sales receipt and a full description 
of  the problem must be included to facilitate the repairs.  Please include the description 
regardless of  whether you discussed the problem with a service technician when contacting 
the Service Center for your Return Authorization.

Please make sure you have followed the instructions carefully before returning any merchandise for 
service.  Authorized M.T.H. Service Centers are independently owned and operated and are not agents 
or representatives of  M.T.H. Electric Trains.  M.T.H. assumes no responsibility, financial or otherwise, 
for material left in their possession, or work done, by privately owned M.T.H. Authorized Service 
Centers.
If  you need assistance at any time email MTH Service at [email protected], or call 410 381-
2580.

Limited One-Year Warranty

M.T.H. products are warrantied for one year from the date of  purchase against defects in material or 
workmanship, excluding wear items such as light bulbs, pick-up rollers, batteries, smoke unit wicks, 
and traction tires.  We will repair, replace, or credit (at our option) the defective part without charge 
for the parts or labor, if  the item is returned to an M.T.H. Authorized  Service Center (ASC) or 
M.T.H. National Authorized Service Center (NASC) within one year of  the original date of  purchase. 
This warranty does not cover damages caused by improper care, handling, or use.  Transportation 
costs incurred by the customer are not covered under this warranty.

Items sent for repair must be accompanied by a return authorization number, a description of  the 
problem, and 

a copy of  the original sales receipt from an Authorized M.T.H. Train Merchant

which gives the date of  purchase.  If  you are sending this product to an Authorized Service Center, 
contact that Center for their return authorization.

This warranty gives you specific legal rights, and you may have other rights that vary from state to 
state.  Specific questions regarding the warranty may be forwarded to M.T.H. Directly.

Service Department:
M.T.H. Electric Trains
7020 Columbia Gateway Drive
.Columbia MD  21046-1532

All M.T.H. products purchased from an Authorized M.T.H. Retailer are covered by this warranty.                        
See our Website

 www.mthtrains.com

 to identify an M.T.H. Retailer near you. 

Summary of Contents for F-3 POWERED B-UNIT
















Reviews: