11
s
ectiOn
4 — a
sseMbly
& i
nstallatiOn
Assembling Remaining Bagger Components
Now that the mounting brackets are assembled and are in place
on the tractor, follow these steps to assemble the remaining
bagger components.
Snap the plastic upper chute support in place by first
1.
clipping the side portion onto the bag support rail with
the edge of the snap feature aligned with the red line (1), as
shown in the inset of Fig. 4-12.
Snap the front portion of the upper chute support to the
2.
bag support rail as seen in 2 of Fig. 4-12.
Install the bagger screen into the bagger cover by first
3.
inserting the end closest to the side with the cutout into
the mounting hole, as in Fig. 4-13. Make sure to feed the
screen under the lip, as in Fig. 4-14.
Clip in the other side by pushing the screen into the
4.
provided cutout. See Fig. 4-14.
Install the grass catcher cover onto the bag support
5.
assembly, as seen in Fig. 4-15. The grass catcher cover goes
inside of the two mounting tabs on the bag support assembly.
1
2
46” Decks
Figure 4-12
Figure 4-11
Figure 4-13
Figure 4-14
Make sure screen sits
under the cover’s lip
Figure 4-15
Summary of Contents for 19A30003000
Page 18: ...Notes 18...
Page 19: ...19...
