-9-
-10-
3
CAMERA
4
CAMERA
CAM MODUS
CA 1
CA 3
NORMAL
/SHUTTER
ON
/OFF
NOR/MIR
NOR/MIR
NOR/MIR
CAMERA
CAM1 N/M
CAM2 N/M
CAM3 N/M
CAM1 DIST
ON
/OFF
NORMAL
/MIRROR
NORMAL
/MIRROR
NORMAL
/MIRROR
CAM3 DIST
ON/
OFF
CAM2 DIST
ON/
OFF
CAMERA1
- Display NOR/MIR set-up Screen by pressing the MENU Key 9 times
and locate the cursor at CAM1 by SCAN and/or CA.SEL Keys.
- Select the desired viewing mode between NOR and MIR by Volume Up/Down Keys.
- NOR : Normal Image / Factory Default
MIR : Mirror Image
(Symmetrically Reversed Image of Left & Right against Normal Image)
CAMERA2
- After locating the cursor at CAM2 by SCAN and/or CA.SEL Keys,
select the desired viewing mode between NOR and MIR by Volume
Up/Down Keys.
- NOR : Normal Image / Factory Default
MIR : Mirror Image
(Symmetrically Reversed Image of Left & Right against Normal Image)
CAMERA3
- After locating the cursor at CAM3 by SCAN and/or CA.SEL Keys,
select the desired viewing mode between NOR and MIR by Volume Up/Down Keys.
- NOR : Normal Image / Factory Default
MIR : Mirror Image
(Symmetrically Reversed Image of Left & Right against Normal Image)
DISTANCE
- Locate the cursor at DISTANCE by SCAN and/or CA.SEL Keys.
- Select ON or OFF by VOLUME Up/Down Keys.
- ON : The rear scale OSD is displayed on the monitor.(Factory Default)
- OFF: No rear scale OSD is displayed on the monitor.
- From the POWER OFF state of the monitor, if the CA1~3 is turned on by
Trigger1 ~ 3, the rear scale OSD is displayed on the monitor but DISTANCE must be
ON in OSD setting.
CAM / MODUS
- Display CAM / MODUS set-up Screen by pressing the MENU Key 9 times and locate the
cursor at CAM / MODUS by SCAN and/or CA.SEL Keys.
- After locating the cursor at CA1 by SCAN and/or CA.SEL Keys,select the desired
CAM / MODUS to view among the cameras NORMAL/MIRROR by Volume Up/Down Keys.
- After locating the cursor at CA3 by SCAN and/or CA.SEL Keys,select the desired
CAM / MODUS to view among the cameras ON/OFF by Volume Up/Down Keys.