MTB Cameras MTB-7300, User Manual, Page: 3 / 8

-3-
- 4 -
Accessories
zœ——“Œ‹ hŠŠŒšš–™Œš
Power
&
Camera
Input Cable
Stand Bracket Kit (Option)
Rubber Sun Shield
User’s Guide
Heavy Duty Bracket Kit
- If the Menu Key is pressed at the POWER ON mode, the OSD appears
in the monitor and the selected letters on OSD is classified in a different color.
- If pressing of the Menu Key is repeated in OSD state, the display
is circled in regular sequence of FUNCTION PICTURE CAMERA Clear of OSD.
the sequence will be as below without the CAMERA OSD.
FUNCTION PICTURE Clear of OSD.
- When POWER OFF (which means STANDBY state), the LED has
RED color.
- After POWER ON, the LED in RED color is turned off and all
LEDs light in GREEN color.
- After POWER ON, the LAST CHANNEL saved from its last operation
is displayed on the monitor.
(Factory Default).
- DIRECT POWER ON Subject To LAST POWER SAVE Mode:
* After starting up the vehicle engine, the monitor turns on automatically
at the same time and the monitor starts displaying of the views from the
(1) If the vehicle engine had been turned off at the POWER ON state of monitor,
the LAST POWER SAVE mode is ON (Factory Recommendation).
(2) If the vehicle engine had been turned off after the POWER OFF of monitor,
the LAST POWER SAVE mode is OFF.
cameras if the LAST POWER SAVE mode is ON.
Operations
III
1 Power Key
2 Menu Key
A
Menu Control Keys
FUNCTION
LANGUAGE
ENGLISH
DIRECTION
DIMMER
RESET ENTER
0 /180
AUTO / OFF
NTSC/ PAL
PICTURE
CONTRAST
BRIGHT
COLOR
TINT
50 (0-100)
50 (0-100)
50 (0-100)
50 (0-100)
NOR/MIR
NOR/MIR
NOR/MIR
CAMERA
CA1 SCAN
CA2 SCAN
CA3 SCAN
CA1 TRIG
0 ~ 9
0 ~ 9
0 ~ 9
0 ~ 9
CA3 TRIG 0 ~ 9
CA2 TRIG
0 ~ 9