MT Logic LE-207781MT, Instruction Manual

Page: 52 / 92

7- Connection between different input signals
A) Connect with PC signal
You can use your LED-TV as a monitor for your personal computer using
a VGA cable(not supplied).
Connection steps
：
* Read the user guide supplied with your computer and ensure that it has
a VGA connector;
* Make sure that the power of the LED-TV and the PC are off;
* Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface
connector on the PC.Then connect the other end to the VGA video interface connector
on the back of the LED-TV.Tighten the screws on the VGA connectors once they are
firmly connected;
* Connect the DC 12V power input with the adaptor come with your LED TV.
* Turn on the power of the LED-TV first, and then turn on the power of the PC;
* Press the SOURCE button to set the video input mode of the LED-TV to “VGA”;
* Use the VOL- / VOL+ on the control panel or remote controller to adjust the volume.
E 6
2. PC Audio Input
3. DC12V power input
3 2 1