The filling process:
After pressing the red power switch it starts pumping from the water
tank to fill water into the machine.
The pump selector switch illuminates
RED
while operating
After the water has been completely drained from the water tank, the red
power switch of the machine must be switched off again.
Remove water tank, fill it up, put into place and switch on the machine
again.
This process can be repeated up to maximum three times.
ATTENTION:
Should the operation repeated more than three times, the machine must
be switched off immediately, as otherwise water can leak from the
machine. In this case, please contact your dealer or manufacturer.
Pump-out procedure:
To do this the pump switch (see image) must be snapped and the
sewage pump button illuminates
green
On the front side of the machine there is a Gardena connection, via
which you can connect a hose to pump out the waste water .
