User’s Manual
SOL10+8-24G2-xxx Series
Panel
Description
:
Item Name
Descriptions
1
POE :
PoE power input indicator: the LED lights when the PoE input jack (the lower jack)
has 36V~57V input.
2
SOL :
Solar power input indicator: the LED lights when SOL terminal is connecting to a
solar panel and the solar panel input voltage is over 24V.
3
CHA :
Charging indicator: the LED lights when BAT terminal is connected to battery and
charging
4
LOA :
Loading indicator: the LED lights when the rear panel output terminal is connecting
to a device and offering power.
The LED always on when power ready.
5
REV :
Battery polarity reverse indicator: the LED lights when the battery polarities are
reversed. (detail description see Sec. 5.1)
6
IN :
PoE Input Jack: the lower RJ45 jack, used for PoE input. Allowed input voltage
36~57V
7
OUT :
PoE Output Jack: the upper RJ45 jack, used for PoE output; Output voltage
depends on what model you selected.
8
Fuse Fuse: for output over current protection, limiting the battery output current <= 10A.
9
SOL : Solar Panel Terminal: used to connect the solar panel.
10
BAT :
Battery terminal: used to connect the battery.
NOTE: ALWAYS CONNECT THIS TERMINAL FIRST.
If solar panel or PoE source is installed before the battery, and if the polarities of
battery are reversed, then the fuse will be burnt.)
11
LOA :
Load Terminal: for wire size up to 10AWG, the output voltage is the same as battery
voltage.
12 POE2
2
nd
PoE Output Jack: used for PoE output; Output voltage depends on what model
you selected, power only, no data. Can be different voltage with front PoE output.
