User’s Manual
PSE-SW5G25B4-IP66
MSTRONIC CO., LTD.
5
* Data pair A on line 1 and 2
* Data pair B on line 3 and 6
* Data pair C plus V+ on line 4 and 5
* Data pair D plus V- on line 7 and 8
Port 5 (UPLINK) may receive DC power over the Ethernet cable, as detailed below:
* Data pair A plus V+ /V- on line 1 and 2
* Data pair B plus V-/V+ on line 3 and 6
* Data pair C plus V+/V- on line 4 and 5
* Data pair D plus V-/V+ on line 7 and 8
The terminal block on the rear panel should be wired as detailed below:
The DIN-4P connector on the rear panel can be also used for power input, you can use an AC/DC
adapter with DIN-4P connector directly, recommend adaptor MS-180-24. (OPTION)
When you connect both green connector and DIN 4P connector, the higher voltage source takes
priority.
*Ethernet Port Wiring
The PoE switch family supports one RJ-45 uplink (port 5 with PoE PD) and four RJ-45 ports (port
1~4 with PoE PSE) with automatic MDI/MDI-X crossover, auto-sense for speed and duplex for
