User’s Manual
PSE-SW5G2280HM
MSTRONIC CO., LTD.
3
*SWITCH LED (the right indicator on RJ45)
LED
STATUS
Description
P1~P5
Link/Act
Green
A network device is detected (1000Mbps), but no
communication activity is detected.
Green
Blinking
This port is transmitting to, or receiving package from
another device at 1000Mbps.
Yellow
A network device is detected (10Mbps or 100Mbps),
but no communication activity is detected.
Yellow
Blinking
This port is transmitting to, or receiving
package from another device at 10Mbps or 100Mbps.
Off
No device is detected.
*PoE LED (the left indicator on RJ45)
P1~P3
802.3at PoE
Yellow
A valid Powered Device (PD) is detected and
delivering power on this port.
Off
No PD is detected on this port.
P4
24V PoE
Yellow
24V power output (Alternative B)
Off
No power output
P5
24V PoE 4 pairs
Yellow
24V power output (Alternative A+B)
Off
No power output
*Power wiring
For PoE operation, make sure your power supply may offer at least 200W for PoE port.
Total power of PoE is 35W x3 (802.3at), 24W x1 (24V/1A) and 48W x1 (24V/2A).
Powered on rear terminal, please make sure the input current don’t over 15Amp (internal fuse
specification)
