MST FMK 9002, Manual To Operations

Page: 7 / 18

FMK 9002 9002.0000.61.0E 05/04
page 7
Sensor Replacement
4. Sensor Replacement
(for oxygen sensors refer to section 4.1)
- Screw off sensor cap and withdraw the old sensor
- Remove the shorting socket from the new sensor
- Plug the new sensor into the socket on the FMK 9002
Be sure to align the orientation guide properly before pushing the sensor into place.
- Write down the concentration value CE stated on the sensor
- Screw in the sensor cap
- Perform calibration procedure
4.1 Replacing the Oxygen Sensor
- Screw off sensor cap and withdraw the old sensor
- Plug the new sensor into the socket on the FMK 9002
- Be sure to align the orientation guides properly before pushing the sensor into place.
- Screw in the sensor cap
- Perform calibration procedure